Using the ACCT

You can establish a connection and then supply the ACCT command for servers that require it.

To use ACCT with or without an FTP proxy

  1. Select a site in the Site Manager. From the Deva xFTP menu, select File > Properties.

  2. Click the Options tab, and select Use site-specific option under the Site-specific configuration options drop down menu.

  3. Click Proxy. The Proxy dialog box opens.

  4. In the Proxy type list, select your proxy type.

  5. Select the Use authentication check box.

  6. Type the password (for ACCT) in the Password field.

  7. Make sure the HOST and PORT field are identical to your site's host and port as specified in the General and Type tabs.

  8. Click Advanced. The Advanced Proxy Settings dialog opens.

  9. Select the option you want.

 

  1. Click OK to close the Advanced Proxy Settings dialog.

  2. Click OK again to close the Proxy dialog.

  3. Click Connect or click Exit.

To use ACCT with an FTP proxy

  1. Select a site in the Site Manager. From the Deva xFTP menu, select File > Properties.

  2. Click the Options tab, and select Use site-specific option under the Site-specific configuration options drop down box.

  3. Click Proxy. The Proxy dialog box opens.

  4. From the Proxy type list, select FTP proxy.

  5. Select the Use authentication check box.

  6. Type the password (for ACCT) in the Password field.

  7. Click Advanced. The Advanced Proxy Settings dialog opens.

  8. Select Option you want.

  9. Click OK to close the Advanced Proxy Settings dialog.

  10. Click OK again to close the Proxy dialog.

  11. Click Connect or Exit.